|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
(R) EL8102, EL8103 Data Sheet March 3, 2003 FN7104.1 P RE LIM IN AR Y 500MHz Rail-to-Rail Amplifiers The EL8102 and EL8103 represent single rail-to-rail amplifiers with a -3dB bandwidth of 500MHz and slew rate of 600V/s. Running off a very low 5.6mA supply current, the EL8102 and EL8103 also feature inputs that go to 0.15V below the VS- rail. The EL8102 includes a fast-acting disable/power-down circuit. With a 25ns disable and a 200ns enable, the EL8102 is ideal for multiplexing applications. The EL8102 and EL8103 are designed for a number of general purpose video, communication, instrumentation, and industrial applications. The EL8102 is available in 8-pin SO and 6-pin SOT-23 packages and the EL8103 is available in a 5-pin SOT-23 package. All are specified for operation over the -40C to +85C temperature range. Features * 500MHz -3dB bandwidth * 600V/s slew rate * Low supply current = 5.6mA * Supplies from 3V to 5.5V * Rail-to-rail output * Input to 0.15V below VS* Fast 25ns disable (EL8102 only) * Low cost Applications * Video amplifiers * Portable/hand-held products * Communications devices Ordering Information PART NUMBER EL8102IS EL8102IS-T7 EL8102IS-T13 EL8102IW EL8102IW-T7 EL8102IW-T13 EL8103IW EL8103IW-T7 EL8103IW-T13 PACKAGE 8-Pin SO 8-Pin SO 8-Pin SO 6-Pin SOT-23 6-Pin SOT-23 6-Pin SOT-23 5-Pin SOT23 5-Pin SOT23 5-Pin SOT23 TAPE & REEL 7" 13" 7" 13" 7" 13" OUTLINE # MDP0027 MDP0027 Pinouts EL8102 (8-PIN SO) TOP VIEW NC 1 8 ENABLE 7 VS+ 6 OUT 5 NC MDP0027 MDP0038 MDP0038 MDP0038 MDP0038 MDP0038 MDP0038 OUT 1 VS- 2 -+ IN+ 3 4 ININ- 2 IN+ 3 VS- 4 + EL8102 (6-PIN SOT-23) TOP VIEW 6 VS+ 5 ENABLE EL8103 (5-PIN SOT-23) TOP VIEW OUT 1 VS- 2 -+ IN+ 3 4 IN5 VS+ 1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc. Copyright (c) Intersil Americas Inc. 2003. All Rights Reserved. Elantec is a registered trademark of Elantec Semiconductor, Inc. All other trademarks mentioned are the property of their respective owners. EL8102, EL8103 Absolute Maximum Ratings (TA = 25C) Supply Voltage from VS+ to VS- . . . . . . . . . . . . . . . . . . . . . . . . 5.5V Input Voltage . . . . . . . . . . . . . . . . . . . . . . . VS+ + 0.3V to VS- - 0.3V Differential Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2V Continuous Output Current . . . . . . . . . . . . . . . . . . . . . . . . . . . 40mA Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Curves Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . . -65C to +125C Ambient Operating Temperature . . . . . . . . . . . . . . . . -40C to +85C Operating Junction Temperature . . . . . . . . . . . . . . . . . . . . . . +125C CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. IMPORTANT NOTE: All parameters having Min/Max specifications are guaranteed. Typ values are for information purposes only. Unless otherwise noted, all tests are at the specified temperature and are pulsed tests, therefore: TJ = TC = TA Electrical Specifications PARAMETER INPUT CHARACTERISTICS VOS TCVOS IB IOS TCIOS CMRR CMIR RIN CIN AVOL Offset Voltage VS+ = 5V, VS- = GND, TA = 25C, VCM = 2.5V, RL to 2.5V, AV = 1, unless otherwise specified. CONDITIONS MIN TYP MAX UNIT DESCRIPTION -8 Measured from TMIN to TMAX VIN = 0V VIN = 0V Measured from TMIN to TMAX VCM = -0.15V to +3.5V 70 VS- - 0.15 Common Mode -9 -0.8 3 -6 0.1 2 95 +8 mV V/C A Offset Voltage Temperature Coefficient Input Bias Current Input Offset Current Input Bias Current Temperature Coefficient Common Mode Rejection Ratio Common Mode Input Range Input Resistance Input Capacitance Open Loop Gain 0.6 A nA/C dB VS+ - 1.5 3.5 0.5 V M pF dB dB VOUT = +1.5V to +3.5V, RL = 1k to GND VOUT = +1.5V to +3.5V, RL = 150 to GND 75 90 80 OUTPUT CHARACTERISTICS ROUT VOP Output Resistance Positive Output Voltage Swing AV = +1 RL = 1k RL = 150 VON Negative Output Voltage Swing RL = 150 to 0V RL = 1k to 0V IOUT ISC (source) ISC (sink) Linear Output Current Short Circuit Current Short Circuit Current RL = 10 RL = 10 70 120 4.85 4.6 30 4.9 4.7 100 25 65 80 150 150 50 m V V mV mV mA mA mA POWER SUPPLY PSRR IS-ON IS-OFF Power Supply Rejection Ratio Supply Current - Enabled Supply Current - Disabled VS+ = 4.5V to 5.5V 70 95 5.6 30 6 dB mA A ENABLE (EL8102 ONLY) tEN tDS VIH-ENB VIL-ENB Enable Time Disable Time ENABLE Pin Voltage for Power-up ENABLE Pin Voltage for Shut-down 200 25 0.8 2 ns ns V V 2 EL8102, EL8103 Electrical Specifications PARAMETER IIH-ENB IIL-ENB VS+ = 5V, VS- = GND, TA = 25C, VCM = 2.5V, RL to 2.5V, AV = 1, unless otherwise specified. CONDITIONS MIN TYP 8.6 0.01 MAX UNIT A A DESCRIPTION ENABLE Pin Input Current High ENABLE Pin Input for Current Low AC PERFORMANCE BW -3dB Bandwidth AV = +1, RF = 0, CL = 5pF AV = -1, RF = 1k, CL = 5pF AV = +2, RF = 1k, CL = 5pF AV = +10, RF = 1k, CL = 5pF BW Peak GBWP PM SR tR tF OS tPD tS dG dP eN iN+ iN0.1dB Bandwidth Peaking Gain Bandwidth Product Phase Margin Slew Rate Rise Time Fall Time Overshoot Propagation Delay 0.1% Settling Time Differential Gain Differential Phase Input Noise Voltage Positive Input Noise Current Negative Input Noise Current RL = 1k, CL = 5pF AV = 2, RL = 100, VOUT = 0.5V to 4.5V 2.5VSTEP, 20% - 80% 2.5VSTEP, 20% - 80% 200mV step 200mV step 200mV step AV = +2, RF = 1k, RL = 150 AV = +2, RF = 1k, RL = 150 f = 10kHz f = 10kHz f = 10kHz 500 AV = +1, RF = 0, CL = 5pF AV = +1, RL = 1k, CL = 5pF 500 140 165 18 20 1 200 55 600 4 2 10 1 15 0.01 0.01 12 1.7 1.3 MHz MHz MHz MHz MHz dB MHz V/s ns ns % ns ns % nV/Hz pA/Hz pA/Hz 3 EL8102, EL8103 Typical Performance Curves Frequency Response for Various Output Voltage Levels 5 VS=5V AV=1 RL=1k CL=5pF 5 Small Signal Frequency Response vs RF and RG Normalized Gain (dB) 3 3 RF=RG=1k 1 RF=RG=2k VOP-P=200mV Gain (dB) 1 -1 VOP-P=1V -1 VS=5V AV=2 RL=1k CL=5pF 1M RF=RG=500 -3 VOP-P=2V -3 -5 100k 1M 10M Frequency (Hz) 100M 1G -5 100k 10M Frequency (Hz) 100M 1G Small Signal Frequency Response for Various Non-Inverting Gains 4 VS=5V CL=5pF RL=1k 4 Small Signal Frequency Response for Various Inverting Gains VS=5V CL=5pF RL=1k RF=1k Normalized Gain (dB) Normalized Gain (dB) 2 AV=2 AV=1 2 AV=-1 AV=-5 0 AV=5 -2 0 -2 -4 AV=10 -4 AV=-10 -6 100k 1M 10M Frequency (Hz) 100M 1G -6 100k 1M 10M Frequency (Hz) 100M 1G 5 Small Signal Frequency Response vs Various RLOAD VS=5V AV=1 CL=5pF VOP-P=200mV 11 Small Signal Frequency Response vs Various RLOAD VS=5V AV=2 CL=5pF RF=RG=1k RL=500 3 9 RL=100 RL=1k Gain (dB) 7 Gain (dB) 1 -1 RL=500 -3 5 RL=1k, 150 3 -5 100k 1M 10M Frequency (Hz) 100M 1G 1 100k 1M 10M Frequency (Hz) 100M 1G Small Signal Frequency Response vs CL 5 VS=5V AV=1 RL=1k VOP-P=200mV CL=10pF Normalized Gain (dB) 9 11 Small Signal Frequency Response for Various CL VS=5V AV=2 RL=1k RF=RG=1k CL=30pF CL=20pF CL=14pF 3 CL=5pF Gain (dB) 1 7 -1 CL=1.5pF 5 CL=9pF -3 3 CL=5pF -5 100k 1M 10M Frequency (Hz) 100M 1G 1 100k 1M 10M Frequency (Hz) 100M 1G 4 EL8102, EL8103 Typical Performance Curves Open Loop Gain and Phase vs Frequency 110 RL=1k 70 RL=150 315 -30 405 -10 VS=5V AV=1 RL=1k Disabled Output Isolation Frequency Response Gain (dB) Gain (dB) RL=150 -10 RL=1k -50 45 135 Phase () 30 225 -50 -70 -90 -90 1k 10k 100k 1M 10M 100M -45 1G -110 1k 10k 100k 1M 10M 100M 1G Frequency (Hz) Frequency (Hz) Power Supply Rejection Ratio vs Frequency -10 550 500 -30 Bandwidth (MHz) PSRR (dB) 450 400 350 300 250 -90 200 -110 1k 150 10k 100k 1M 10M 100M Small Signal Bandwidth vs Supply Voltage RL=1k CL=5pF AV=1 -50 PSRR- -70 PSRR+ AV=2 3 3.5 4 VS (V) 4.5 5 5.5 Frequency (Hz) Output Impedance vs Frequency 100 2.5 Small Signal Peaking vs Supply Voltage RL=1k CL=5pF 2 10 Impedance () Peaking (dB) 1.5 AV=1 1 1 AV=2 0.1 0.5 0.01 10k 0 100k 1M Frequency (Hz) 10M 100M 3 3.5 4 VS (V) 4.5 5 5.5 Common-Mode Rejection Ratio vs Frequency -15 10 Supply Current vs Supply Voltage -35 CMRR (dB) 8 IS (mA) -55 6 -75 4 -95 2 -115 100k 0 1M 10M 100M 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 Frequency (Hz) VS (V) 5 EL8102, EL8103 Typical Performance Curves Harmonic Distortion vs Output Voltage -60 VS=5V RL=1k CL=5pF AV=2 -70 -75 Distortion (dBc) -80 -85 -90 -95 VS=5V f=5MHz VO=1VP-P for AV=1 VO=2VP-P for AV=2 HD3@ Harmonic Distortion vs Load Resistance -70 Distortion (dBc) HD2@10MHz HD2@5MHz HD2@ A V =2 HD2@ AV =1 -80 @ HD2 1MH z z HD3@10MH -90 MH HD3@5 z AV =2 V =1 HD3@1MHz -100 1 2 3 VOP-P (V) 4 5 HD3@ A -100 100 RLOAD () 1k 2k Harmonic Distortion vs Frequency -50 VS=5V RL=1k CL=5pF VO=1VP-P for AV=1 VO=2VP-P for AV=2 AV=2 HD2@ Voltage and Current Noise vs Frequency 1k Voltage Noise (nV/Hz) Current Noise (pA/Hz), -60 Distortion (dBc) 100 eN -70 -80 HD2@AV=1 10 IN+ IN - -90 HD3@AV=2 HD =1 3@AV -100 1 10 Frequency (MHz) Large Signal Transient Response - Rising VS=5V, AV=1, RL=1k to 2.5V, CL=5pF 40 1 10 100 1k 10k 100k 1M 10M Frequency (Hz) Large Signal Transient Response - Falling VS=5V, AV=1, RL=1k to 2.5V, CL=5pF 3.5 3.5 2.5 2.5 1.5 1.5 2ns/div 2ns/div Small Signal Transient Response VS=5V, AV=1, RL=1k to 2.5V, CL=5pF Output Swing VS=5V, AV=5, RL=1k to 2.5V 2.6 2.5 2.4 VIN 5 2.5 2.6 2.5 0 2.4 VOUT 10ns/div 2s/div 6 EL8102, EL8103 Typical Performance Curves Output Swing VS=5V, AV=5, RL=1k to 2.5V Enabled Response CH1 5 ENABLE Input 2.5 CH2 0 VOUT 2s/div CH1, CH2, 1V/div, M=100ns Disabled Response 1.4 1.2 ENABLE Input CH1 Power Dissipation (W) 1 0.8 0.6 Package Power Dissipation vs Ambient Temperature - JEDEC JESD51-7 High Effective Thermal Conductivity Test Board 909mW SOT23-5/6 JA=230C/W 435mW 0.4 0.2 0 SO8 JA=110C/W 0 25 50 75 85 100 125 150 CH2 VOUT CH1, CH2, 0.5V/div, M=20ns Ambient Temperature (C) Package Power Dissipation vs Ambient Temperature - JEDEC JESD51-3 Low Effective Thermal Conductivity Test Board 1 0.9 Power Dissipation (W) 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 0 25 50 75 85 100 125 150 Ambient Temperature (C) SOT23-5/6 JA=256C/W 391mW 625mW SO8 JA=160C/W 7 EL8102, EL8103 All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems. Intersil Corporation's quality certifications can be viewed at www.intersil.com/design/quality Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see www.intersil.com 8 |
Price & Availability of EL8103 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |